Regulatory Information - CalAmp LMU-5541 Hardware Installation Manual

Acknowledgement: You acknowledge that you have read this LIMITED WARRANTY, understand it and agree to be bound by its terms and
conditions. You also agree that: (1) No oral or written information or advice
given by CalAmp, its dealers, distributors, agents or employees shall in any way increase the scope of this Limited Warranty and you may not
rely on any such information or advice; (2) Unless a written governing
agreement signed by you and CalAmp exists, this License Agreement is the complete and exclusive statement of agreement between CalAmp and
you regarding the licensing of the Software, Documentation and Related
Materials and supersedes all proposals, oral or written, and any other communications you may have had prior to purchasing your license; (3)
Except for the price and delivery terms agreed upon by both parties, the terms
LMU-5541 Hardware & Installation Guide -
48/49
and conditions of this License Agreement shall supersede those set forth in any purchase order where the purchase order conflicts or is
inconsistent with or adds to the terms and conditions of this License and those
superseded purchase order terms and conditions shall be null and void; (4) You agree to assure that copies of this License Agreement are
distributed, read and agreed to by each Developer using the Software and/or
Documentation.
Governing Law: This Agreement shall be governed by the laws of the State of California, United States, excluding its conflicts of law principles
and excluding the United Nations Convention on Contracts for the
International Sale of Goods. You agree to exclusive jurisdiction of California State federal and state courts, Ventura County, for resolution of any
dispute related to this Agreement.
U.S. Government Protected Rights: The Software Documentation and Related Materials are provided with RESTRICTED RIGHTS. Use,
duplication or disclosure by the Government is subject to restrictions as set forth
in subparagraph ©(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or subparagraphs ©(1) and (2)
of the Commercial Computer Software-Restricted Rights at 48 CFR 52.227-
19, as applicable. Manufacturer is CalAmp Wireless Networks., 15635 Alton Pkwy #250, Irvine, CA 92618. Rights are reserved under copyright
laws of the United States with respect to unpublished portions of the Software.

12 Regulatory Information

Human Exposure Compliance Statement
Pursuant to 47 CFR § 24.52 of the FCC Rules and Regulations, personal communications services (PCS) equipment is subject to the radio
frequency radiation exposure requirements specified in § 1.1307(b), § 2.1091 and §
2.1093, as appropriate.
CalAmp Wireless Networks. certifies that it has determined that the LMU-5541™ complies with the RF hazard requirements applicable to
broadband PCS equipment operating under the authority of 47 CFR Part 24, Subpart E of the FCC Rules and Regulations. This determination is
dependent upon installation, operation and use of the equipment in accordance with all instructions provided.
The LMU-5541™ is designed for and intended to be used in fixed and mobile applications. "Fixed" means that the device is physically secured at
one location and is not able to be easily moved to another location.
"Mobile" means that the device is designed to be used in other than fixed locations and generally in such a way that a separation distance of at
least 20 cm is normally maintained between the transmitter's antenna and the body of the user or nearby persons. The LMU-5541™ is not
designed for or intended to be used in mobile applications (within 20 cm of the body of the user) and such uses are strictly prohibited.
To ensure that the LMU-5541™ complies with current FCC regulations limiting both maximum RF output power and human exposure to radio
frequency radiation, a separation distance of at least 20 cm must be maintained between the unit's antenna and the body of the user and any
nearby persons at all times and in all applications and uses. Additionally, in mobile applications, maximum antenna gain must not exceed:
8dBi in WCDMA Band 2/LTE Band 2/7/25/38/41;
5dBi in WCDMA /LTE Band 4, and
8.6dBi in GSM850;
10.19dBi in PCS1900;
9.42dBi in WCDMA Band 5;
9.41dBi in LTE Band 5;
8.7dBi in LTE Band
12; 9.16dBi in LTE Band 13;
9.36dBi in LTE Band 26(814-824);
9.41dBi in LTE Band 26(824-849
FCC Rules and Industry Canada (IC) regulatory information
Compliance Statement (Part 15.19)
The equipment device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference
received including interference that may cause undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by CalAmp Wireless Networks could void the user's authority to operate the equipment.
Manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Compliance Statement (Part 15.105(b))
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio