GRASS VALLEY NV9680 User Manual page 31

• Software Versions.
In the setup menu, press the 'Software Versions' button. Three buttons appear:
APP APP FIRMWARE FIRMWARE
SV1161- SV1161- VERSION VERSION
O0 A0 O0 A0 O1 O1
The 2 buttons at the top left display the software version numbers. Use the 'Exit' button
on the right to return to the setup menu.
• Panel Test Mode.
In the setup menu, press the 'Panel Test Mode' button. One button appears:
Press the 'Push to Test' button repeatedly to execute the test.
Each time you press the button, the panel illuminates all its LCD buttons in a single
color, changing the color each time you press the button. Keep pressing the button
until all 7 colors (high and low tally) have been displayed.
The panel test shows you (1) whether all the buttons are working and how well and (2)
whether the software and firmware are working.
When you are finished using the setup menu, press 'Exit' one or more times to return the
panel to its normal pre-connected state.
When you connect the panel to its network, the panel leaves its setup state and begins to
initialize in its normal operational state. After a short time, the panel will have initialized to
its configured state and will display its default button page.
EXIT EXIT
• • •
PUSH PUSH
TO TO
TEST TEST
• • •
NV9680
User's Guide
15