CueScript CSTM Series Installation And Operation Manual page 22

22” and 24” talent monitors
Table of Contents

Advertisement

17 SETUP
RETURN: Return to Level 1 menu
FORMAT DISPLAY: Default value is AUTO.
AUTO – Displays detected video format approx. 5 sec.
ON – Displays detected video format always.
OFF- Does not display detected video format.
TIMECODE: Enables/Disables TIMECODE from SDI signal.
OFF – Does not display timecode from SDI.
LTC – Displays LTC from SDI ANC.
VITC1/VITC2 - Displays VITC1 or VITC2 from SDI ANC.
Default value is OFF.
USERBIT: Enables/Disables Userbit from SDI
PICTURE DELAY: Default value is NORMAL.
NORMAL – Enables all video enhancement processing for optimum quality.
FAST – Reduces some video processing for faster picture response.
POWER SAVE: Enables/Disables power consumption control when there is no valid video signal.
ALWAYS ON – Does not control power saving.
OTHER – Waits for selected period until it goes to sleep.
Default value is ALWAYS ON.
Wakes up at any key input or valid video input signal.
KEY LOCK: Prohibits OSD key operation except MENU key.
BACKLIGHT: Controls backlight at range from 0 to 100%.
Default value is 80%.
OSD ALPHA: Controls transparency of OSD menu at rage from 0 to 6.
[Opaque] 0 ~ 6 [Transparent]
Default value is 0.
RESET TO DEFAULT: Restores all setting back to factory standard.
Requires dual confirmation.
BACKUP USER CONFIG: Backs up current setting at where it can be retrieved later.
RESTORE USER CONFIG: Restores backed up setting from where user saved for the last time
22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CSTM Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Cstmn-22Cstml-24

Table of Contents