Left Arrow; Control Pushbuttons Brightness Setup Menu; Lcd Controller Menu - CueScript CSTM Series Installation And Operation Manual

11.4.5 LEFT ARROW (-)

•
Decrements the OSD item value
See the Section below for more information on the LCD OSD control functions.

11.5 Control Pushbuttons Brightness Setup Menu:

You may set the two brightness levels on the pushbutton control panel by following the procedure below.
1. Turn the monitor off with the on/off pushbutton.
2. Press the Rotate and Left button simultaneously and press the on-off pushbutton.
3. All the buttons will illuminate to the higher brightness mode.
4. Use the up or down buttons to set the desired higher brightness.
5. Press the right button when ready to store high brightness level.
6. All the buttons will illuminate to the lower brightness mode.
7. Use the up or down buttons to set the desired lower brightness.
8. Press the right button when ready to store low brightness level.
9. All buttons will flash 3 times to indicate a successful storage.
10. The unit will turn off. Press the on-off power button to turn the monitor on.

11.6 LCD Controller Menu

To make adjustments to the LCD display, pressing the MENU button and quickly releasing it will bring up the
LCD On-Screen-Display (OSD) menu.
Pressing the Right or Left arrows and the Up or Down arrows allows you to highlight available changes in
the LCD controller menu. Generally, once you have navigated to the item you want to change, and enter in
a new value, the Right arrow button will select the change.
11