Miele PWT 6089 Vario Operating And Installation Instructions page 82

Installation and connection
^ Secure the dryer through the guides
to the washer-extractor dryer using 4
screws and washers (supplied in the
accessory pack).
Make sure that the connecting
screws are correctly tensioned
between the washer-extractor and
the dryer (45 Nm).
^ Connect the plugs from the
washer-extractor and the dryer to the
relevant electronic unit and to the
relevant switch on the control panel.
The white cables connect to the top
on the On/Off switch. The brown
cables connect to the left on the
On/Off switch.
82
^ Screw the control panel to
washer-extractor using 2 screws.
^ Screw the joining panel to the back of
the washer-extractor using 4 screws.