Cardinal Health ALLY TO GO NPWT Patient User Manual page 10

3. Grasp the blue Twist N' Connect™ end of the tubing attached to the canister. Gently twist counterclockwise and pull
up to remove tubing from canister (Figure 4).
4. To remove the canister, press the Canister Release Button located above the canister (Figure 5), and gently pull
the bottom of canister down to remove from the ALLY TO GO™.
5. Cap the canister and ask your healthcare professional how to properly dispose of a used canister.
6. To install a new canister, hold the new unused canister at the bottom and slide upwards into the holder.
7. Line up the two ports on the canister with the two ports on the ALLY TO GO™. Press the canister up and into
the ALLY TO GO™ until it clicks and locks into place (Figure 6).
Figure 4
Figure 5
Figure 6
10