Connect To Pc; Troubleshooting - BenQ DC 2300 User Manual

BenQ DC 2300 User's Manual

4.3. Connect to PC

1. If your operation system is Windows ME/2000/XP, you will not need to install the
camera driver.
2. After the software installatioin is completed and the camera is connected to the PC, the
PC will automatically create a new disk named Removable Disk (please see below
picture). All the images stored in the Secure Digital card can be found in a folder named
"100Media" which the route is "Removable Disk / DCIM / 100Media" . Please note that
the Removable Disk will only exist when the camera is connected to the PC.
5. T
ROUBLESHOOTING
Symptoms
The power won't turn on.
The power turns off during
use.
Causes
• The batteries are out of power.
• The AC power adapter is not
well connected or damaged.
• The batteries are out of power.
• Auto power off.
• The memory card is taken out
when in process of saving
pictures.
• The adapter has not been
connected properly.
18
Solutions
• Replace the batteries with new
ones.
• Make sure the AC power is
connected and it's not damaged.
• Replace the batteries with new
ones.
• Switch on the Power .
• Do not remove the memory
card while you save the image.
• Connect the adapter correctly.