Playback Mode - BenQ DC 2300 User Manual

BenQ DC 2300 User's Manual

3.1.2. Playback Mode

Please set the Mode Dial at Playback Mode (
functions. The TFT LCD Monitor will show the latest captured image. Use Up (
and Down (
I. To View A Part Of An Image
Set the Mode Dial at Playback Mode (
latest captured image.
1. Press Right Direction Button (
2. Press Up Direction Button (
3. Press Right Direction Button (
4. Use four direction buttons to view the image.
5. Press Menu Button to cancel this function.
II. To Show The Information Of A Still Image
Please set the Mode Dial at Playback Mode (
show the latest capture image. Use Up (
to select other captured images.
1. Select an image
2. Press LCD Button to show the information.
3. Press LCD Button again to erase the information.
III. To Play A Recorded Movie Clip
Please set the Mode Dial at Playback Mode (
Direction Buttons to select a movie clip. Select a recorded movie clip.Press Right
Direction Button (
You can press Right Direction Button (
Button ( ) again to cancel the pause.
IV. Go Into Thumbnail Images (Small Images)
Please set the Mode Dial at Playback Mode (
1. Press Left Direction Button(
2. Use Up(
) Direction Buttons to select other captured images or movie clips.
) to play the movie clip.
Note
) to pause the playing and press Right Direction
) and Down( ) to select an image or movie clip.
9
) before setting up the below
). The TFT LCD Monitor will show the
).
) to adjust the size of the image.
) again to enter.
) . The TFT LCD Monitor will
) and Down (
). Use Up (
) .
) to enter thumbnail image table.
)
) Direction Buttons
) and Down( )