BenQ DC 2300 User Manual page 10

BenQ DC 2300 User's Manual
IV. Set Up Self-timer (Preset at no self-timer)
To activate the self-timer or cancel the self-timer, press Up Direction Button.
Self-timer will be activated when the Shutter Button is pressed. This function can
delay the shutter from release for 10 seconds. Self-timer is automatically canceled
after the shutter is released.
V. Set Up Digital Zoom (Preset at no digital zoom)
This camera is equipped with 4X digital zoom (0.2X per step). To activate digital
zoom please press Right Direction Button. To adjust the status of digital zoom
please use Right Direction Button and Left Direction Button. To cancel digital
zoom function please adjust it to 1.0X.
It is normal that the image with digital zoom is not as sharp comparing to the image without
digital zoom.
VI. Set Up Image Size (Preset at 1600 x 1200)
Please set the Mode Dial at Recording Mode (
enter "Still Image" menu table. Use Up Direction Button (
Direction Button(
up. Press Right Direction Button (
preferred setting using Up (
Direction Button (
cancel the setting. When the LCD Display is back to the "Still Image" menu table,
please check if the new setting is shown on the right side of the LCD screen. If
the new setting is not shown please repeat the above procedure.
1. Select "Size"
2. There are four resolutions can be selected which are:
(
(
(
(
VII. Set Up Image Quality (Preset at Fine quality)
Please set the Mode Dial at Recording Mode (
enter "Still Image" menu table.
1. Select "Quality"
2. There are three image qualities can be selected which are:
Note
) to move the color bar to the feature you would like to set
) to confirm the new setting or press Menu Button to
) 2048 x 1536
) 1600 x 1200
) 1280 x 960
) 640 x 480
7
) and press Menu Button to
) to enter the setting and select your
) and Down ( ) Direction buttons. Press Right
) and press Menu Button to
) and Down