BenQ DC 2300 User Manual page 13

BenQ DC 2300 User's Manual
3. Press Right Direction Button(
clip.
4. To go back to the thumbnail image table press Left Direction Button (
again.
When a thumbnail image is selected, please check if it shows (
the LCD screen. If (
still image.
V. To Delete Image(s)
Please set the Mode Dial at Playback Mode (
enter "Play" menu table.
1. Select "Delete"
2. (a) Select "Delete Image" to confirm the willing to delete the selected image or
movie clip.
(b) Select "Delete All" to confirm the willing to delete all stored images or
3. Select "No" to cancel the order or select "Yes" to delete.
4. Press Right Direction Button (
VI. To Format a SD Card
When a new SC card is used please format the card first
before using it.
Please set the Mode Dial at Playback Mode (
Button to enter "Play" menu table.
1. Select "Delete".
2. Select "Format"
3. Select "No" to cancel the order or select "Yes" to format the
memory card.
4. Press Right Direction Button (
VII. Set Up Slide Show (Preset at 1 second)
Please set the Mode Dial at Playback Mode (
"Play" menu table.
1. Select "Slide Show".
2. Select the time for slide show from 1 second to 9 seconds (2 seconds per
step).
) is shown it means the selected thumbnail is a movie clip but not a
movie clips.
) to enlarge the selected image or movie
Note
) and press Menu Button to
) to confirm the setting.
) and press Menu
) to confirm the setting.
) and press Menu Button to enter
10
) on the left top corner of
)