Set Up Mode - BenQ DC 2300 User Manual

BenQ DC 2300 User's Manual

3.1.4. Set Up Mode

Please set the Mode Dial at Set Up Mode (
Button to enter "Set Up" menu table. Use Up Direction Button
( ) and Down Direction Button (
the feature you would like to set up. Press Right Direction Button
( ) to enter the setting and select your preferred setting using
Up ( ) and Down (
Press Right Direction Button (
press Menu button to cancel the setting. When the LCD Display
is back to the "Set Up" menu table, please check if the new setting
is shown on the right side of the LCD screen. If the new setting is
not shown please repeat the above procedure.
I. Set Up Beep Sound (Preset at On)
Please set the Mode Dial at Set Up Mode (
"Set Up" menu table.
1. Select "Beep".
2. Press Right Direction Button (
3. Select "On" to activate the beep sound or select "No" to cancel
the beep sound.
4. Press Right Direction Button (
II. Set Auto Power Off (Preset at Cancel)
1.Select "Power Off".
2. Press Right Direction Button (
3. Select the time of auto power at "5 minutes" or "10 minutes". Or select
"Cancel" to cancel auto power off function.
4. Press Right Direction Button (
III. Set Date Stamp (Preset On)
1. Select "Date Stamp".
2. Press Right Direction Button (
3. Select "On" to activate date print or select" Off" to cancel date imprint.
4. Press Right Direction Button (
) and press Menu
) to move the color bar to
) Direction Buttons.
) to confirm the new setting or
).
) to confirm the setting.
).
) to confirm the setting.
).
) to confirm the setting.
13
) and press Menu Button to enter