Users could configure "Remote PIN to Open the Door" on the GXV32XX WebGUI to open the door with a
single click.
This can be done from the GXV32XX web UI Advanced Settings GDS Settings and set the following:
1. Click on "Add New Item" (The GXV32XX supports up to 10 GDS3710 devices).
2. Enter the "GDS Name", it can be any name to identify the GDS3710, in our case its "open".
3. Enter the "GDS Number", in our case its "1000".
4. Enter the "GDS Password" which is the password set on "Remote PIN to Open the Door" on the
GDS3710.
Once the user presses the ring button on the GDS3710, an INVITE will be sent to the GXV32xx phone and
the GDS3710 stream will be played on the GVX phone with a button that appears on the left side panel
named "open" which is the "GDS Name". If users press the "open" button, a SIP message will be sent to
the GDS3710 in order to open the door as shown below.
Connecting GDS3710 with GXV32XX Configuration Guide
Figure 11: GDS Settings
Figure 12: Open Door from GVX32xx
P a g e
|
10