Assy-Sensor-Peeler Disassembly - SATO PV4 Service Manual

5-1-14 ASSY-SENSOR-PEELER disassembly

Part name
(8-7-1) BRACKET-CUTTER-MANUAL
(8-7-2) HOLDER-SENSOR-PEELER
(8-7-3) ASSY-PCB-PRESENCE-HARNESS
(8-7-4) GUIDE-BACKFEED
(8-7-5) SPRING-BACKFEED
(8-7-6) SCREW-TAPPING
Ver. 1.00
1) Remove the two (8-7-6) SCREWs
2) Separate the (4-1-2) COVER-BUTTON-OPEN
and the (8-7-3) ASSY-PCB-PRESENCE-HARNESS
from the (8-7-2) HOLDER-SENSOR-PEELER
3) Remove the two (8-7-6) SCREWs
4) Separate the (8-7-2) HOLDER-SENSOR-PEELER
and the two (8-7-5) SPRING-BACKFEED and the two (8-7-4) GUIDE-BACKFEED
from the (8-7-1) BRACKET-CUTTER-MANUAL
- 54 -
Disassembly procedure
PV4