Assy-Holder-Platen Disassembly - SATO PV4 Service Manual

5-1-4 ASSY-HOLDER-PLATEN disassembly

Part name
(1-1-1-3-1) HOLDER-PLATEN-A
(1-1-1-3-2) ASSY-PLATEN-ROLLER
(1-1-1-3-2-1) PLATEN-ROLLER
(1-1-1-3-2-2) BUSH-PLATEN-ROLLER
(1-1-1-3-2-3) GEAR-FEEDING
(1-1-1-3-2-4) RING-E
(1-1-1-3-3) ASSY-PCB-BM
(1-1-1-3-4) FPC-BM
(1-1-1-3-5) HOLDER-SENSOR-BM
(1-1-1-3-6) SHAFT-PEELER-PIVOT
(1-1-1-3-7) HOLDER-PLATEN-CAP
(1-1-1-3-8) SCREW-TAPPING
(1-1-1-3-9) SCREW-TAPPING
Ver. 1.00
Disassembly procedure
1) Remove the (1-1-1-3-9) SCREW
2) Separate the (1-1-1-3-7) HOLDER-PLATEN-CAP
and the (1-1-1-3-6) SHAFT-PEELER-PIVOT
and the (1-1-1-3-2) ASSY-PLATEN-ROLLER
from the (1-1-1-3-1) HOLDER-PLATEN-A.
3) Separate the (1-1-1-3-2-3) GEAR-FEEDING
and the (1-1-1-3-2-4) RING-E and the two (1-1-1-3-2-2) BUSH-PLATEN-ROLLER
from the (1-1-1-3-2-1) PLATEN-ROLLER
4) Remove the (1-1-1-3-8) SCREW
5) Remove the two (1-1-1-3-8) SCREWs
6) Separate the (1-1-1-3-5) HOLDER-SENSOR-BM
and the (1-1-1-3-3) ASSY-PCB-BM from the (1-1-1-3-1) HOLDER-PLATEN-A
- 42 -
PV4