Table of Contents
Advertisement
MANDÍK CPV Installation, commissioning, and maintenance
ANNEX C. QUICK STARTING THE UNIT – POL822 ROOM
UNIT
Buttons on the POL822 room unit:
OPERATING MODE
TEMPERATURE SET
POINT
1) ROOM UNIT UPDATE - When power is connected and the connection is made to the
controller, the room unit updates its data for a few seconds with the Climatix controller
and the "P–" symbol is shown on the display.
2) DEFAULT SETTINGS - After initial start-up of the unit, the default setting from the factor
is "Off" for safety reasons:
NO SYMBOL
IZU 06/2021
MANDÍK, a.s., www.mandik.cz
R
FAN OUTPUT SET
POINT
TEMPERATURE SET
POINT
47
Advertisement
Table of Contents
