Maintenance And Service Intervals - Mandik CPV Installation, Commissioning And Maintenance

MANDÍK CPV Installation, commissioning, and maintenance
• ATTENTION: ELECTRIC HEATERS, HEAT EXCHANGERS AND HYDRAULIC SYSTEM
COMPONENTS MUST BE COOLED DOWN TO AMBIENT TEMPERATURE, MEANING A
MAXIMUM SURFACE TEMPERATURE OF +40°C!
• ATTENTION: PRESSURE IN ALL PRESSURISED SYSTEMS MUST BE EQUALISED TO THE
AMBIENT PRESSURE!

9.4 MAINTENANCE AND SERVICE INTERVALS

Detailed operating instructions and maintenance and service procedures are provided in the
following paragraphs 9.5 and the individual parts of the unit.
Check operation
1. UNIT IN GENERAL
Overa l l check of cl ea ni ng, da ma ge a nd corros i on
1.01.
on a l l components of the uni t (outs i de/i ns i de).
Overall check of the tightness of the doors,
1.02. service and fixed panels on all components of
the unit.
Check the tightness of the connections of HVAC
1.03.
ducts and the condition of the damping inserts.
Check the unit for excessive vibrations.
1.04.
Check the air output of the unit (when the unit
1.05.
and filters are clean inside).
1.06.
1.07.
* status of unit operation while performing the checks
Check operation
2. FILTERS G2-F9, GREASE
Check the filter pressure losses.
2.01.
Check the integrity of the filtration medium of
2.02.
the filter elements.
Check the integrity of the filter holder sealing
2.03.
profiles and the seal between the filter elements.
Check the setting and function of the differential
2.04.
pressure gauge (switches, digital, sloping tube).
Check the fitting of pressure probes for
2.05.
measuring filter differential pressure.
* status of unit operation while performing the checks
IZU 06/2021
SERVICING AND MAINTENANCE OPERATIONS
operation
SERVICING AND MAINTENANCE OPERATIONS
operation
MANDÍK, a.s., www.mandik.cz
Unit in
Service/rectificati
on method
Y/N *
cleaning and
N
repair
Y repair
Y repair
Y repair
Y measuring
Unit in
Service/rectificati
on method
Y/N *
value from the
Y
measuring and
control system
N replacement
N repair
repositioning/r
Y
eplacement
N repair
Intervals (months)
1 3 6 12
Intervals (months)
1 3 6 12
31
R