Download Print this page

Operation Instructions - Backyard Pro Patio Series Operation Instructions Manual

Tower patio heater
Hide thumbs Also See for Patio Series:

Advertisement

OPERATION INSTRUCTIONS

LEAK CHECK
WARNING
• Perform all leak tests outdoors.
• Extinguish all open flames.
• NEVER leak test when smoking.
• Do not use the heater until all connections have been
leak tested and do not leak.
1. Make 2-3 oz. of leak check solution (one part liquid dishwashing detergent and three parts
water).
2. Apply several drops of solution where hose attaches to regulator.
3. Apply several drops of solution where regulator connects to cylinder.
4. Make sure all patio heater and light valves are OFF.
5. Turn cylinder valve ON.
If bubbles appear at any connection, there is a leak.
1. Turn cylinder valve OFF.
2. If leak is at hose/regulator connection: tighten connection and perform another leak test. If
bubbles continue appearing, the hose should be returned to the place of purchase.
3. If leak is at regulator/cylinder valve connection: disconnect, reconnect, and perform another
leak check. If you continue to see bubbles after several attempts, cylinder valve is defective
and should be returned to cylinder's place of purchase. If NO bubbles appear at any
connection, the connections are secure. NOTE: Whenever gas connections are loosened or
removed, you must perform a complete leak test.
4. Complete installation.
OPERATION INSTRUCTIONS
1. Make 2-3 oz. of leak check solution (one part liquid dishwashing
2. Apply several drops of solution where hose attaches to regulato
3. Apply several drops of solution where regulator connects to cyli
4. Make sure all patio heater and light valves are OFF.
5. Turn cylinder valve ON.
If bubbles appear at any connection, there is a leak.
1. Turn cylinder valve OFF.
2. If leak is at hose/regulator connection: tighten connection and p
continue appearing, the hose should be returned to the place of pu
3. If leak is at regulator/cylinder valve connection: disconnect, reco
check. If you continue to see bubbles after several attempts, cylind
returned to cylinder's place of purchase.
If NO bubbles appear at any connection, the connections are
NOTE: Whenever gas connections are loosened or removed, you
4. Complete installation.
13
Leak Check
WARNING
• Perform all leak tests outdoors.
• Extinguish all open flames.
• NEVER leak test when smoking.
• Do not use the heater until all connections have been
leak tested and do not leak.
Hose / Regulator
connection
Regulator / Cylinder
connection
13
13

Advertisement

loading

This manual is also suitable for:

554hpsqrss554hpsqrstl554hpsqrbz554hpsqrblk