Advertisement
ASSEMBLY INSTRUCTIONS
9. Attach the three side panels (G) to the
9. Attach the three side panels (G) to the
heater using the (M3/16) screws (AA).
heater using the (M3/16) screws (AA).
Note :
1. M3/16 screws from Step 3 unscrewed
1. M3/16 screws from Step 3
from lower supports.
unscrewed from lower supports.
2.Do not cover the front side where
2. Do not cover the front side where
the control knob is.
the control knob is.
10. Screw the knob (CC) onto the front
10. Screw the knob (CC) onto the front panel
panel (I). Attach the panel to the heater
(I). Attach the panel to the heater by inserting
by inserting the two tabs into the slots
the two tabs into the slots on the base (J).
on the base (J). Hook the chain (which
Hook the chain (which is preassembled
onto the front panel) into the hole in the front
is preassembled onto the front panel)
of the control box. The chain will keep the
into the hole in the front of the control
panel from falling forward while lighting
box. The chain will keep the panel
/operating your heater.
from falling forward while lighting and
operating your heater.
10
ASSEMBLY INSTRUCTIONS
9
G
10
CC
I
10
Advertisement
