Backyard Pro Patio Series Operation Instructions Manual page 8

ASSEMBLY INSTRUCTIONS
5. Unscrew（M3/16) 4pcs screws from the
5. Unscrew (M3/16) 4pcs screws from the
bottom of the middle plate(F). Install an
bottom of the middle plate (F). Install
AA battery(EE) into the control box.
an AA battery (EE) into the control
Assemble the control box(K) onto the bottom
of middle plate using the (M3/16) screws.
box. Assemble the control box (K) onto
Note : The control knob is to face to the front
the bottom of middle plate using the
of the heater where the magnet is installed in
(M3/16) screws. Note: The control
the middle plate.
knob is to face to the front of the
heater where the magnet is installed in
the middle plate.
6. Screw the winning screws, washers
6. Screw the winning screws,washers and
and the winning nuts to assemble the
the winning nuts to assemble the reflector(A)
into the damper(B).
reflector (A) into the damper (B).
8
ASSEMBLY INSTRUCTIONS
5
6
A
B
8
K