Advertisement
Quick Links
OPERATION INSTRUCTIONS
DANGER
If you smell gas:
1.
Shut off gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from the appliance and
immediately call your gas supplier or fire department.
WARNING
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance. An
LP-cylinder not connected for use shall not be stored in the
vicinity of this or any other appliance.
WARNING
For Outdoor Use Only.
WARNING
Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage. Read the
owner's manual thoroughly before installing or servicing this
equipment. If the information in this manual is not followed
exactly, a fire or explosion may result causing property
damage, personal injury or loss of life.
DANGER
CARBON MONOXIDE HAZARD
This appliance can produce carbon
monoxide, which has no odor. Using it in
an enclosed space can kill you. Never use
this appliance in an enclosed space such as
a camper, tent, car, or home.
05/2020
PATIO HEATER
554PH1SS, 554PH1BZ, 554PH1STL, 554PH1BLK
KEEP THIS MANUAL FOR FUTURE REFERENCE.
TABLE OF CONTENTS
Safety Information.............................................................
Hardware & Contents........................................................
Assembly Instructions.......................................................
Operation...........................................................................
Troubleshooting.................................................................
Equipment Limited Warranty............................................
3177588
2-3
4-5
6-10
11
12-13
14
1
Advertisement
Related Manuals for Backyard Pro Patio Series
Summary of Contents for Backyard Pro Patio Series
- Page 1 PATIO HEATER OPERATION INSTRUCTIONS DANGER If you smell gas: Shut off gas to the appliance. 2. Extinguish any open flame. 3. If odor continues, keep away from the appliance and immediately call your gas supplier or fire department. WARNING Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
-
Page 2: Safety Information
SAFETY INFORMATION Before you assemble or operate this unit, please carefully read this entire manual. Failure to do so may result in a fire, explosion, injury or death. WARNING WARNING • The installation of this unit must adhere to local codes from heated surfaces. - Page 3 SAFETY INFORMATION NOTE: You must follow all steps to properly WARNING assemble this heating item. Make sure the gas valve is turned “OFF” before assembling. Do NOT • Young children should be carefully supervised when attempt to assemble without proper tools. they are in the area of the appliance.
- Page 4 HARDWARE ITEM DESCRIPTION M6x10 Screw M6 Nut M8 Bolt M6x22Bolt Wrench Reflector Stud Wing Nut Washer Anchoring Arm Anchoring Nut Cap Nut Small screw Webbing Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
- Page 5 CONTENTS ITEM DESCRIPTION Reflector Panel Center Reflector Head Assembly Post Tank Housing Post Support Support Legs Regulator Base Wheel Assembly...
- Page 6 ASSEMBLY INSTRUCTIONS 1. Align the holes in the wheel assembly (J) with the holes in the base (I). Attach the wheel assembly to the base using 2 pcs M6x10 screws (AA) and 2 pcs M6 nuts (BB). 2. Mount the 3 pcs anchoring arms (II) to the holes on the base (I) using 6 pcs M6x10 screws (AA) and 6 pcs M6 nuts (BB).
- Page 7 ASSEMBLY INSTRUCTIONS 4. Attach the post support (F) to the top of the support legs (G) using 6 pcs M6 x 22 bolts (DD) and 6 pcs M6 nuts (BB). 5. Place the tank housing (E) on top of the assembly.
- Page 8 ASSEMBLY INSTRUCTIONS WARNING Remove plastic protective coating on reflector panel (A) and center reflector (B) before assembling! 7. Slide two reflector panels (A) together and assemble the outer rim using one small screw (LL) and one cap nut (KK). Repeat this step with the third reflector panel (A).
- Page 9 ASSEMBLY INSTRUCTIONS 10. Remove the pre-assembled screws from the post support (F) and attach post (D) to the post support (F) using those 4 screws. 11. Place the 20 lb gas cylinder in the center of the base, fasten it with the webbing (MM). 12.
- Page 10 ASSEMBLY INSTRUCTIONS • Before performing any maintenance always disconnect propane gas tank. • Keep the heating item free and clear from combustible materials. • Visually inspect burner for obstructions and keep tank enclosure free and clear from debris. • Use a soft brush to get rid of the mild stains, loose dirt and soil after the burner is completely cooled down. Wipe down with a soft cloth.
-
Page 11: Operation
OPERATION Before performing a leak test, be sure that no sparks can occur and you are in a spacious outdoor area. Connect the propane gas tank to the regulator and turn the valve on the unit to the “off” position. Brush a soap and water mixture on all connections. -
Page 12: Troubleshooting
TROUBLESHOOTING PROBLEM CAUSE SOLUTION The burner injector is clogged. Clean the burner injector. The burner will not light. There is low gas supply pressure. Call your gas supplier. The burner flame goes off There is low gas pressure. Call your gas supplier. immediately after ignition. - Page 13 TROUBLESHOOTING PROBLEM CAUSE SOLUTION Check the minimum installation Air passageways are blocked. clearances and air passageways for The heater produces a whistling debris. noise when the burner is lit. Operate the burner until the air is There is air in the gas line. completely purged.
- Page 14 EQUIPMENT LIMITED WARRANTY Backyard Pro warrants its equipment to be free from defects in material and workmanship for a period of 30 days. This is the sole and exclusive warranty made by Backyard Pro covering your Backyard Pro brand equipment. A claim under this warranty must be made within 30 days from the date of purchase of the equipment.