Advertisement
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
11
. Propane Only-Proper Hose Connection.
11. Propane Only-Proper Hose Connection. Connect
Connect the hose to the hose connector in the control box.
the hose to the hose connector in the control box.
WARNING! Ensure the hose does not contact any high
temperature surfaces, or it may melt and leak causing
WARNING! Ensure the hose does not contact
a
fire.
any high temperature surfaces, or it may melt
Always test the hose and connections for leak with soapy
and leak causing a fire. Always test the hose
water at the end of all connections.
and connections for leak with soapy water at
the end of all connections.
12. Connect hose and regulator to cylinder. The
12. Connect hose and regulator to cylinder.
The propane gas and cylinder are sold separately.
propane gas and cylinder are sold separately. Use
Use a standard 20 lb. propane cylinder only.
a standard 20 lb. propane cylinder only. Use this
Use this heater only with a propane vapor withdrawal
heater only with a propane vapor withdrawal
supply system. See chapter 12 of the standard for
supply system. See chapter 12 of the standard
storage and handling of liquefied petroleum gas,
for storage and handling of liquefied petroleum
ANSI/NFPA 58. Your local library or fire department
gas, ANSI/NFPA 58. Your local library or fire
should have this book.
A minimum supply pressure of 0.4 p.s.i. is required for
department should have this book. A minimum
the purpose of input adjustment for propane gas.
supply pressure of 0.4 psi is required for the
Storage of an appliance indoors is permissible only if
purpose of input adjustment for propane gas.
the cylinder is disconnected and removed from the
Storage of an appliance indoors is permissible
appliance. A cylinder must be stored outdoors in a
only if the cylinder is disconnected and removed
well-ventilated area out of the reach of children. A
disconnected cylinder must have dust caps tightly
from the appliance. A cylinder must be stored
installed and must not be stored in a building, garage
outdoors in a well-ventilated area out of the
or any other enclosed area. The minimum permissible
reach of children. A disconnected cylinder must
gas supply pressure of 10 W.C. is required for purpose
have dust caps tightly installed and must not be
of input adjustment. The minimum hourly of 17000 Btu
stored in a building, garage or any other enclosed
is required input rating for a heater for automatic
area. The minimum permissible gas supply
operation at ratings less than full input rating. The
pressure regulator and hose assembly supplied with
pressure of 10 W.C. is required for purpose of
the appliance must be used. The installation must
input adjustment. The minimum hourly of 17000
conform with local codes, or in the absence of local
BTU is required input rating for a heater for
codes,with national fuel gas code, ANSI Z223.1
automatic operation at ratings less than full input
/NFPA54, natural gas and propane Installation Code,
rating. The pressure regulator and hose assembly
CSA B149.1, or propane storage and handling code,
supplied with the appliance must be used. The
B149.2.
installation must conform with local codes, or
in the absence of local codes, with national
fuel gas code, ANSI Z223.1/NFPA54, natural gas
11
12
11
Standard 20 lb. tank
11
Advertisement
