Related Manuals for Backyard Pro PH08-SB
Summary of Contents for Backyard Pro PH08-SB
- Page 1 FLAME HEATER MODEL NUMBER: PH08-SB, PH08-SSB WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov. FOR OUTDOOR USE ONLY. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Package Contents
PACKAGE CONTENTS Reflector Damper Upper Support Wireguard Glass Tube Middle plate Side Panel Control box Lower Support Front Panel Base QUANTITY Reflector Damper Upper Support Wireguard Glass Tube Middle plate Side Panel Lower Support Front Panel Base Control box... -
Page 3: Safety Information
HARDWARE CONTENTS (shown actual size) Screw Fixing Knob M3/16 Bracket Qty. 1 attach Qty. 4 to the regarding parts Stability Ring Rubber Ring AA battery Wheels (if avalable) Qty.1 Qty.1 Qty.1 set Qty.1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. - Page 4 SAFETY INFORMATION DANGER DANGER • EXPLOSION - FIRE HAZARD • CARBON MONOXIDE HAZARD • Keep solid combustibles, such as building materials, • This heater is a combustion appliance. All paper or cardboard, a safe distance away from the combustion appliances produce carbon monoxide heater as recommended by the instructions.
-
Page 5: Burn Hazard
SAFETY INFORMATION WARNING WARNING This product can expose you to chemicalsincluding Lead • This product is fueled by propane gas. Propane gas and Lead Compounds, which are known to the state of is invisible, odorless, and flammable. An odorant is Californiato cause cancer, and Carbon Monoxide, Lead normally added to help detect leaks and can be and Lead Compounds which are knownto the state of... - Page 6 ASSEMBLY INSTRUCTIONS 1. Attach 1 set wheels(FF) to the base(J), if needed. 2. Attach the stability ring(DD) to the base (J),if avalable.
- Page 7 ASSEMBLY INSTRUCTIONS 3. Unsrew any pre installed (M3/16) screws(AA) first. Assemble the four lower supports (H) to the base (J) and middle plate（F）using the (M3/16) screws (AA). 4. Unsrew any pre installed (M3/16) screws(AA) first. Assemble the four upper supports (C) to the lower supports (H) using the (M3/16) screws (AA).
- Page 8 ASSEMBLY INSTRUCTIONS 5. Unscrew（M3/16) 4pcs screws from the bottom of the middle plate(F). Install an AA battery(EE) into the control box. Assemble the control box(K) onto the bottom of middle plate using the (M3/16) screws. Note : The control knob is to face to the front of the heater where the magnet is installed in the middle plate.
- Page 9 ASSEMBLY INSTRUCTIONS 7. Carefully install the glass tube (E) by lifting up and inserting through the center hole in the upper plate. Ensure the rubber ring(GG) To aid in installation is attached to the lower edge of the glass tube place rubber as illustrated.
- Page 10 ASSEMBLY INSTRUCTIONS 9. Attach the three side panels (G) to the heater using the (M3/16) screws (AA). Note : 1. M3/16 screws from Step 3 unscrewed from lower supports. 2.Do not cover the front side where the control knob is. 10.
- Page 11 ASSEMBLY INSTRUCTIONS 11. Propane Only-Proper Hose Connection. WARNING! Ensure the hose does not contact any high temperature surfaces, or it may melt and leak causing a fire. 12. Connect hose and regulator to cylinder. The propane gas and cylinder are sold separately. Use a standard 20 lb.
- Page 12 ASSEMBLY INSTRUCTIONS A dented, rusted or damaged propane cylinder may be hazardous and should be checked by your cylinder supplier. Never use a propane cylinder with a damaged valve connection. The propane cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders of the U.S.
- Page 13 OPERATION INSTRUCTIONS Leak Check WARNING • Perform all leak tests outdoors. • Extinguish all open flames. • NEVER leak test when smoking. • Do not use the heater until all connections have been leak tested and do not leak. Hose / Regulator connection Regulator / Cylinder connection...
-
Page 14: Carbon Monoxide Hazard
OPERATION INSTRUCTIONS DANGER • CARBON MONOXIDE HAZARD • For outdoor use only. Never use inside house, or other unventilated or enclosed areas. This heater consumes air (oxygen). Do not use in unventilated or enclosed areas to avoid endangering your life. Caution: Do not attempt to operate until you have read and understand all General Safety Information in this manual and all assembly is complete and leak checks have been performed. - Page 15 OPERATION INSTRUCTIONS 5.For maximum heat turn control knob to ‘HIGH’. 6.To turn heater off, turn control knob to ‘OFF’. 7.Close the vlave of the gas cylinder or the regulator after use. CLEANING AND MAINTENANCE: To enjoy outstanding performance of your heater for years make sure to perform the following maintenance activities on a regular basis: ●...
-
Page 16: For Your Safety
OPERATION INSTRUCTIONS WARNING NOTE FOR YOUR SAFETY: In a salt-air environment (such as near an Ocean) ● DO NOT touch or move heater for at corrosion occurs more quickly than normal. Least 45 minutes after use. ● Frequently check for corroded areas and Repair ●...