Table of Contents
Advertisement
3.4.3 Import a Layout File
You can import a layout file to the client for use or reference.
Steps
1. Click Artistic Configuration → Display Configuration .
2. Click
to open a layout file from the local computer.
3.5 Configure Mirroring Display
You can create a mirroring effect on a video wall by cascading two devices. Configure the same
signal source for the two devices, and flip the input source of one display horizontally or vertically
to achieve a mirroring effect.
Steps
Note
There are two types of mirroring: horizontal mirroring and vertical mirroring. The configuration
methods are similar. This section uses an eight-display video wall as an example to describe how to
configure mirroring on the video wall.
1. Click Artistic Configuration → Display Configuration , and add four displays to the video wall
canvas.
2. Click Artistic Configuration → Input Settings , create input source 1 and configure an input
source file for the input source.
3. Repeat steps 1 and 2 to add another four displays, create input source 2, and configure the
same input source file for the input source 2.
4. Click
to flip the image of the input source 2 horizontally.
Video Wall Controller User Manual
Figure 3-9 Configure Input Source 1
19
Advertisement
Table of Contents
