Table of Contents
Advertisement
Chapter 3 Artistic Video Wall Configuration
This chapter describes how to design an artistic video wall solution on the client. Designing a video
wall solution includes configuring monitors, configuring input signal sources, and linking devices
with the video wall. You can design your video wall in offline mode and apply the configuration to
your devices.
3.1 Configure Displays
A video wall consists of multiple monitors or displays. Add displays based on the actual video wall
configuration and configure the positions, angles, and properties of your displays. After finishing
display configuration, you can export it as a reference for onsite deployment.
3.1.1 Add Displays
Before designing your video wall, add displays to the video wall on the client.
Steps
1. Click Artistic Configuration → Display Configuration .
2. Select Manufacturer and Model. If the client does not show the desired manufacturer and
model, click New on the bottom to add a new model and configure the properties and click
Save.
3. Click and select the desired video wall scale in the grid.
4. Optional: Set Rotation of your displays. Your displays can be rotated clockwise at any desired
angle, accurate to 0.1 degree.
Video Wall Controller User Manual
Figure 3-1 Add Display
10
Advertisement
Table of Contents
