Table of Contents
Advertisement
5. Optional: Set Background Color of your displays. The background color applies to all displays.
6. Click Add to Wall to add the displays to the video wall canvas on the right.
3.1.2 Configure Display Properties
After adding displays to the wall, configure display properties to ensure proper displaying.
Steps
1. Click Artistic Configuration → Display Configuration .
2. Select a display on the wall and configure the properties.
Property
Output Type
Manufacturer/Model
Output Resolution
Display Area Width/
Height
Bezel Top/ B ottom/
Left/ R ight
LED Resolution
3. Click Save.
3.1.3 Adjust Display Positions
After adding and configuring the displays, adjust the positions to obtain an artistic video wall
effect.
Steps
1. Click Artistic Configuration → Display Configuration .
2. Select a display on the wall, and adjust its position.
Video Wall Controller User Manual
Table 3-1 Description of Display Properties
Output type of your display. LCD and LED types are available.
Manufacturer and model of your display. After the manufacturer and
model are selected, the rest of the properties are automatically
configured. Please check that the values are consistent with the actual
values.
Please select the proper resolution based on the actual need.
Enter the actual display area width and height of your display. The
display area does not include the borders and bezels around the area.
Bezel width on the top, bottom, left, and right of the screen. The bezel
width here is made up of the widths of the physical bezel and the
black border.
Only available when your display is an LED type. The resolution must
be smaller than or equal to Output Resolution but greater than 288 ×
288, and the width should be a multiple of two.
Description
11
Advertisement
Table of Contents
