HIKVISION C10M Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Computer Hardware
  5. C10M Series
  6. User manual
HIKVISION C10M Series User Manual

HIKVISION C10M Series User Manual

Screen splicing processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
C10M Screen Splicing Processor
User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION C10M Series

Summary of Contents for HIKVISION C10M Series

  • Page 1 C10M Screen Splicing Processor User Manual...
  • Page 2 Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to as "the Company" or "Hikvision"). No unit or individual may extract, copy, translate or modify all or part of this manual in any way without written permission. Unless otherwise agreed, the company does not provide any express or implied representation or warranty of this manual.

  • Page 3: Table Of Contents

    C10M Series Splicing Controller User Manual table of Contents Chapter1 Overview ........................... 1 1.1 Product introduction ......................1 1.2 Screen display characteristics ....................1 1.3 Functional characteristics ....................2 1.4 Control management ......................3 1.5 System connection diagram ....................4 Chapter2 Hardware description .....................
  • Page 4 C10M Series Splicing Controller User Manual 4.3.3 Disconnect device ...................... 26 4.3.4 splice .......................... 26 4.3.5 drop out ........................29 4.3.6 Multi-device settings ....................30 4.3.7 Multi-device switching ....................31 4.4 Basic operation ........................32 4.4.1 Signal source management ..................32 4.4.2 Window operation ....................

  • Page 5: Chapter1 Overview

    C10M Series Splicing Controller User Manual Chapter1 Overview 1.1 Product introduction The screen splicing processor is a high-performance video image processing workstation with pure hardware architecture and no operating system. It can display multiple dynamic images on multiple screens to realize multi-window splicing. Designed for high-quality display of multiple screens, especially for flexible control of different types of screens and resolutions.

  • Page 6: Functional Characteristics

    C10M Series Splicing Controller User Manual There is no scale limitation when the screen is zoomed out, and the screen can be enlarged to fill the entire field of view. Support for arbitrary overlay of pictures The hierarchical relationship and layout position of each picture can be arbitrarily customized, independent of each other and the size of the image space.

  • Page 7: Control Management

    C10M Series Splicing Controller User Manual Supports the function of character superimposition on the input signal channel, which is convenient for the user to grasp the source of the signal in real time. Support input signal preview function Real-time monitoring of all input signals prevents the operator from displaying the wrong signal on the large screen.

  • Page 8: System Connection Diagram

    C10M Series Splicing Controller User Manual 1.5 System connection diagram Picture1-1 System connection diagram...

  • Page 9: Chapter2 Hardware Description

    28U switches the main cabinet, supports input 32 slots, outputs 36 slots, supports 36 high-division acquisition, supports redundant power supply, and comes standard with 2 power modules; 2.3 Control panel description The C10M series screen splicing processor has 14 chassis sizes of 14U, 20U and 28U.

  • Page 10: Host

    C10M Series Splicing Controller User Manual 2.3.1 14U host The rear panel of the 14U chassis is as follows: Picture2-1 14U chassis rear panel...

  • Page 11: Host

    C10M Series Splicing Controller User Manual 2.3.2 20U host The rear panel of the 20U chassis is as follows: Picture2-2 20U chassis rear panel...

  • Page 12: Host

    C10M Series Splicing Controller User Manual 2.3.3 28U host The rear panel of the 28U chassis is as follows: Picture2-3 28U chassis rear panel...
  • Page 13 C10M Series Splicing Controller User Manual Description: 1)Power input port Drawer structure, support AC 100~240V/50~60Hz input. 2)Network communication interface Ethernet connection port, dedicated to the host computer. 3)RS-232 serial output Provides 1 independent RS-232 port (DB9 male) for connecting PC or central control equipment for centralized control of the system.

  • Page 14: Chapter3 Board Description

    C10M Series Splicing Controller User Manual Chapter3 Board description 3.1 Board category Table3-1 Board category model Appearance Input board DVI input card VGA input card DVI input card HDMI input card DisplayPort input card Output board card DVI output HDMI output...

  • Page 15: Input Board

    C10M Series Splicing Controller User Manual 3.2 Input board 3.2.1 DVI input board Table3-2 DVI input board Signal format DVI-D full digital T.M.D.S. signal in DVI 1.0 specification 800x600, 1024x768, 1280x720, 1280x800, 1280x1024, Resolution 1360x768, 1366x768, 1440x900, 1400x1050, 1600x1200, 1680x1050, 1920x1080, 1920x1200...

  • Page 16: Sdi Input Board

    C10M Series Splicing Controller User Manual type EDID stand by customization impedance 75Ω Nominal level 0.7Vp-p RGB: 15-pin D-sub (DB15/DE-15F) / female port, interface connected to YPbPr signal through the adapter 3.2.3 SDI input board Table3-4 SDI input board Quantity...

  • Page 17: Displayport Input Board

    C10M Series Splicing Controller User Manual Maximum CAT-6 STP/UTP is recommended for 100 meters (at output 1920×1200@60Hz) distance interface RJ45/parent interface Front-end HDBaseT transmitter equipment 800x600, 1024x768, 1280x720, 1280x800, 1280x1024, Resolution 1360x768, 1366x768, 1440x900, 1400x1050, 1600x1200, 1680x1050, 1920x1080, 1920x1200 HDCP...

  • Page 18: Output Board

    C10M Series Splicing Controller User Manual 3.3 Output board 3.3.1 DVI output board Table3-7 DVI output board DVI-I signal in DVI1.0 specification (output VGA signal Signal format through adapter) 800x600, 1024x768, 1280x720, 1280x800, 1280x1024, 1360x768, 1366x768, 1440x900, 1400x1050, 1600x1200, Resolution...

  • Page 19: Sdi Output Board

    C10M Series Splicing Controller User Manual Maximum 4.95Gbps data rate interface HDMI Type A 3.3.3 SDI output board Table3-9 SDI output board Quantity 4-channel SDI signal output, 4-channel output backup Signal format HD-SDI/3G-SDI Resolution 720i,720p,1080i,1080p impedance 75Ω Output stand by...

  • Page 20: Chapter4 Processor Software Usage

    C10M Series Splicing Controller User Manual Chapter4 Processor software usage 4.1 Client software 1) Run the installation file HIK VideoWall.exe as an administrator to start the installation. The installation interface is as shown below. Picture 1 Then click "Next" to install, as shown in the figure below.
  • Page 21 C10M Series Splicing Controller User Manual Picture 3 3) If the host does not have "2005vcredist_x86" and "2008vcredist_x86" installed before, you need to check these two items; then select "Next" to enter the path selection interface, click "Browse (B)", select the location where the program is installed, as shown...
  • Page 22 C10M Series Splicing Controller User Manual Select "repair" and then click the "next" option to repair the installation. After the installation is complete, Click the "finish" button directly, as shown in Figure 7. (Selecting "Uninstall" will uninstall the "2008vcredist_x86" plugin)
  • Page 23 C10M Series Splicing Controller User Manual Picture 8 Click "next" to pop up the license terms shown in Figure 9; Picture 9 After reading the terms, check "I have read and accept the license terms.", then click "install>" to start the installation. It may take a minute or two to wait patiently. When the progress bar is read, click "finish"...

  • Page 24: Log In

    C10M Series Splicing Controller User Manual Picture 11 After reading the terms, click "yes" to start installing "2005vcredist_x86". After the progress bar is read, the installation is completed automatically. 7) After all the above installations are successful, the shortcut of HIK VideoWall.exe will...

  • Page 25: Software Operation

    C10M Series Splicing Controller User Manual Picture 14 4.3 Software operation Click “Software Operation” on the menu bar to enter the “Software Operation” page. The toolbar includes two modules: “Software Operation” and “Device”. “Software Operation” includes “Connect”, “Disconnect”, “Communication”, “Splicing” and “Exit”; “Device”...
  • Page 26 C10M Series Splicing Controller User Manual Picture 15 Picture 16 There are two ways to configure the communication port of the controller. One is NET connection and the other is COM connection. If you select NET to connect to the controller, check "Select NET connection", enter "Device IP address"...
  • Page 27 C10M Series Splicing Controller User Manual Picture 18 4.3.1.3 advanced Click the "Advanced" button, and the items "IP Address", "Subnet Mask", "Gateway IP", and "MAC Address" pop up at the bottom of the dialog box. Picture 19 Selecting a device in the searched list will read the device's "IP address", "subnet mask", "gateway IP", and "MAC address"...

  • Page 28: Connecting Device

    C10M Series Splicing Controller User Manual Picture 20 After successfully connecting to the device using NET mode (described in detail in the next section), click the “Communication” button to enter the communication settings dialog box, and then click the “Advanced” button to display the “IP address” and “Subnet mask”...
  • Page 29 C10M Series Splicing Controller User Manual Picture 22 In order to ensure the normal connection of the device, there are several precautions: First, before connecting the device, please ensure that the IP address is correct. Second, check the network between the device and the host computer is clear, and there is no IP conflict.

  • Page 30: Disconnect Device

    C10M Series Splicing Controller User Manual Picture 23 Use COM connection In the controller communication port configuration, select "Select COM connection", select "COM" and "Baud rate", click OK, and then click the "Connect" button, the host computer and the device can communicate normally. The Connect button is grayed out when connected to the device.
  • Page 31 C10M Series Splicing Controller User Manual Picture 25 Picture 26 You can set the screen group 1, screen group 2, screen group 3, and screen group 4 separately by clicking the different screen group tabs.
  • Page 32 C10M Series Splicing Controller User Manual Picture 27 4.3.4.1 Splicing wall enable/disable You can enable and disable the splicing screen by checking or unchecking the check boxes in front of each splicing wall below the dialog box and clicking OK. The splicing wall 1 is inoperable and is always enabled.

  • Page 33: Drop Out

    C10M Series Splicing Controller User Manual Picture 29 4.3.4.3 Stitching screen wall For regular stitching, LCD screens, check the “Splicing Walls” checkbox, and set the physical screen, screen spacing, and maximum number of windows for the videowall, then click OK. The physical screen set therein determines the output layout of the splicing wall;...

  • Page 34: Multi-Device Settings

    C10M Series Splicing Controller User Manual Picture 32 4.3.6 Multi-device settings If you want to switch to connect multiple devices, click the “Device” button to pop up the “Multiple Device Settings” dialog box, as shown below.

  • Page 35: Multi-Device Switching

    C10M Series Splicing Controller User Manual Picture 33 Picture 34 Add up to four devices in the multi-device settings dialog box. After modifying the name and device IP address, select the Enable check box in front of the device and click OK.

  • Page 36: Basic Operation

    C10M Series Splicing Controller User Manual Picture 35 4.4 Basic operation Click "Basic Operation" on the menu bar, and the "Settings", "Multi-Screen Switching", "Preplan" and "Pre-Monitoring" modules appear on the toolbar. This chapter focuses on the functions of the toolbar and the basic operation of the tree list and workspace.
  • Page 37 C10M Series Splicing Controller User Manual Picture 37 4.4.1.1 Increase grouping Click the right button of the root directory of the source list, select "Add Group", the dialog box of "Settings" name will pop up, enter the name, click OK to successfully add the group.
  • Page 38 C10M Series Splicing Controller User Manual Picture 39 Picture 40 4.4.1.2 Change name 1) Change the group name Select the group or root directory in the source list, then right-click and select "Change Name" to pop up the setting name dialog box, modify the name and click OK to modify the success.
  • Page 39 C10M Series Splicing Controller User Manual Picture 42 4.4.1.3 Delete group Select the group or root directory in the source list, then right-click and select “Delete Group” to pop up the prompt message. Click the OK button to delete the group from the source list.
  • Page 40 C10M Series Splicing Controller User Manual Picture 44 4.4.1.4 Move to group Select a source in the Source list, then right-click and select Move to Group. A list of groups will pop up, including Ungrouped and Newly Grouped. If unselected, the source moves to the root directory;...
  • Page 41 C10M Series Splicing Controller User Manual Select a source in the source list, drag it to the blank of the workspace and release the mouse. A new window will open and fill a screen, as shown below. Picture 47 2) Pull the window Select a source in the source list, and then hold down the left mouse button in the blank area of the workspace to open the window.
  • Page 42 C10M Series Splicing Controller User Manual Picture 48 4.4.1.6 Source switching 1) Select a signal source in the source list, drag it to a window in the workspace, release the mouse, and cut the signal source of the window. 2) Change to the selected signal source;...
  • Page 43 C10M Series Splicing Controller User Manual Picture 49 Picture 50 4.4.1.8 Character overlay Select a source in the source list, right-click and select “Character Overlay” to bring up the “Character Overlay” dialog box, as shown in the figure below.
  • Page 44 C10M Series Splicing Controller User Manual Picture 51 Picture 52 In the character overlay dialog box, fill in the characters in the input characters, set the "font height", "font", "foreground color", "background color", "horizontal offset", "vertical offset", "horizontal start" Position, Vertical Start Position, and Overlay Mode, then click Apply or OK.
  • Page 45 C10M Series Splicing Controller User Manual Picture 53 Picture 54 Enter “Mode Name”, “Horizontal Start”, “Vertical Start”, “Width” and “Height” in the dialog box, click OK, the new mode appears under the signal source, and the window is opened in this mode. The cropped screen can be seen on the large screen.
  • Page 46 C10M Series Splicing Controller User Manual Picture 56 Picture 57 2)VGA<->YPBPR Select a VGA source in the source list, right click and select “VGA to YPBPR”, the “VGA<->YPBPR” dialog box will pop up, select VGA or YPBPR, click “OK” button to...
  • Page 47 C10M Series Splicing Controller User Manual Picture 58 Picture 59 3) Signal source input properties Select a VGA source in the source list, right-click and select “Source Input Properties”, the “VGA Input Card Properties” dialog box will pop up, modify the properties in the dialog box and click “Apply”...

  • Page 48: Window Operation

    C10M Series Splicing Controller User Manual Picture 60 Picture 61 4.4.2 Window operation After selecting the source in the source list to open the window in the workspace, select the window and right click to pop up multiple options to operate the window, as shown in...
  • Page 49 C10M Series Splicing Controller User Manual Picture 62 4.4.2.1 Top/bottom If there are several windows in the rework area, select one of the windows, right click and select "Top", "Bottom" or click "Close All" in the "Settings" module, the window is moved to all windows.
  • Page 50 C10M Series Splicing Controller User Manual Picture 63 4.4.2.3 Attributes Select any window on the workspace, right click and select "Properties" will pop up the "Properties" dialog box, as shown below. Picture 64 1) In the attribute, "window ID" and "data source ID" cannot be modified;...
  • Page 51 C10M Series Splicing Controller User Manual Picture 65 Picture 66 4.4.2.5 full screen Select the window on the workspace and right click to select "Full Screen" or click the full screen button in the upper right corner of the window to fill the window with the...
  • Page 52 C10M Series Splicing Controller User Manual Picture 67 Picture 68 4.4.2.6 Maximize within the unit Select a window in the workspace, hold down the left mouse button and drag to move the window position into a unit. There are three ways to maximize the window within the unit it covers.
  • Page 53 C10M Series Splicing Controller User Manual Picture 69 Picture 70 4.4.2.7 reduction After maximizing the window or maximizing the unit, click the right mouse button to select "Restore" or click the Restore button at the top right of the window to restore the size and position of the window.
  • Page 54 C10M Series Splicing Controller User Manual Picture 72 4.4.2.9 locking Select a window in the workspace, click the right button of the window to select "Lock" or click "Lock" in the "Settings" module. The window is locked, and you cannot move, modify the position and size.

  • Page 55: Setting

    C10M Series Splicing Controller User Manual 4.4.3 Setting The toolbar's Settings module includes New Window, Close Window, Lock, Top, Bottom, Quick Top, Test, Input and Output Card, Screen Grouping, "basemap", "pre-operation", etc. Picture 74 Among them, "new window", "close all windows", "lock", "top", "bottom", "quick top" are shortcuts for window operations.
  • Page 56 C10M Series Splicing Controller User Manual Picture 75 1) Close all windows Click the "Close All" button in the "Settings" module and the workspace window will be cleared. 2) Locked Select the workspace window, click the "Lock" button in the "Settings" module, the window is locked, you can view the section 5.2.20, click the "lock"...
  • Page 57 C10M Series Splicing Controller User Manual Picture 77 4.4.3.4 Screen grouping Click the "Screen Grouping" button in the "Settings" module, the "Screen Grouping Settings" dialog box will pop up, as shown below. 1) Select “Group1”, “Group2”, “Group3” or “Group4” in the dialog box to set the screen grouping of different videowalls.
  • Page 58 C10M Series Splicing Controller User Manual Picture 78 4.4.3.5 Base map Click the "Basemap" button in the "Settings" module, the "Basemap Settings" dialog box will pop up, as shown below. Picture 79 1) Click the "Select Basemap" button, the "Screen Basemap Progress" dialog box will pop up, click "Add Bitmap File", select the basemap in the Find dialog box (resolution does not...

  • Page 59: Multi-Screen Switching

    C10M Series Splicing Controller User Manual Picture 81 4) Restart the device and display the base map on the big screen. 4.4.3.6 Pre-operation Click the "Basemap" button in the "Settings" module, the "Basemap" button becomes selected, the "Apply" button lights up; the window is operated in the workspace, the window does not change on the large screen, click After "Apply", the large screen will...

  • Page 60: Plan Management

    C10M Series Splicing Controller User Manual Picture 83 4.4.5 Plan management Click "Plan Management" in the tree list, and the tree list area displays the plan list. This section mainly introduces the plan and the round robin operation. Picture 84 4.4.5.1 New plan...
  • Page 61 C10M Series Splicing Controller User Manual Picture 85 Picture 86 Picture 87 4.4.5.2 Application plan 1) Select the plan in the plan list and double click to apply the plan;...
  • Page 62 C10M Series Splicing Controller User Manual 2) Select the plan in the plan list and right click and select “Open” to apply the plan; Picture 88 Click the "Open" button in the plan module, select a plan file in the pop-up dialog box, and click "Open"...
  • Page 63 C10M Series Splicing Controller User Manual Picture 90 Picture 91 2) Coverage plan Reset the scene in the workspace, then select the plan to be modified in the plan list, right-click and select “Save”, the “Proposal Properties” dialog box will pop up, you can modify the name and click “OK”, click in the prompt dialog box.
  • Page 64 C10M Series Splicing Controller User Manual Picture 92 Picture 93 Picture 94 4.4.5.4 Delete plan Select the plan to be deleted in the plan list, right-click and select Delete. In the pop-up "Prompt" dialog box, click "OK" to delete the plan from the list.
  • Page 65 C10M Series Splicing Controller User Manual Picture 95 4.4.5.5 Round patrol Click the “Rolling” button in the “Preview” module to pop up the “Rolling Settings” dialog box, as shown in the figure below. The steps to set up the round robin are as follows: 1) Check the plan.

  • Page 66: Admission

    C10M Series Splicing Controller User Manual Picture 97 4.5 Admission Click the “Preview” button on the toolbar and the preview area appears below the workspace, as shown below. Picture 98 Note: In order to have a preview, the device must have a preview code card and be...

  • Page 67: Echo Setting

    C10M Series Splicing Controller User Manual 4.5.1 Echo setting In the lower left corner of the preview area, select the “Preview Code Card”, and then click the “set” button in the lower right corner to pop up the “Echo Settings” dialog box.

  • Page 68: Reset

    C10M Series Splicing Controller User Manual Picture 101 Picture 102 4.5.3 Reset After finding the input channel, click the “reset” button in the lower right corner of the preview area to unmark the marked source. 4.5.4 Open the pre-supervision Click the “play” button in the lower left corner of the preview area, and the preview window displays the preview screen.

  • Page 69: Stop Pre-Supervision

    C10M Series Splicing Controller User Manual Picture 103 Double-click the preview window to zoom in to view the preview screen. Picture 104 4.5.5 Stop pre-supervision Click the “stop” button in the lower left corner of the preview area to stop the preview.

  • Page 70: Tool

    C10M Series Splicing Controller User Manual 4.6 tool Click "Tools" on the menu bar, and the toolbar will display three modules: "Administrative Tools", "Expand Platform" and "Version". Management tools include "EDID", "License File", "User Management", "Find Camera", "Font of Window" and "Options"; versions include "Version"...

  • Page 71: User Management

    C10M Series Splicing Controller User Manual Picture 106 4.6.2 User Management Click the User Management button in the management module of the toolbar. The User Management dialog box is displayed, as shown in the following figure. 1) Set "User Name", "Password", "Repeat Password" and "Type" in the "User Management"...

  • Page 72: Window Font

    C10M Series Splicing Controller User Manual 3) Add, delete, edit functions, please log in using ADMIN user. 4.6.3 Window font Click the "Window Font" button in the management module of the toolbar to pop up the "Windows Window Configuration" dialog box, as shown below. Set the parameters of each font and click "OK"...
  • Page 73 C10M Series Splicing Controller User Manual Picture 111 Click the “Software Operation” - “Splicing” button, the “Splicing Settings” dialog box will pop up, and the “Independent Monitor” setting parameter module will appear, as shown in the figure below. Picture 112 Set the left and right monitor sizes in the Independent Monitor settings parameter module and click OK to add a separate monitor on either side of the splicing screen.
  • Page 74 C10M Series Splicing Controller User Manual Picture 113 Picture 114 Double-click a separate monitor, pop up the “Change Monitor Name” dialog box, set the “Association Matrix”, “Input Port” and “Output Port” of the monitor and click OK to set the matrix associated with the monitor. And its corresponding input and output ports. This feature is used with matrix control, and the next section introduces Matrix Control.
  • Page 75 C10M Series Splicing Controller User Manual Picture 116 1) Matrix Click the "Tools" - "Matrix" button, the "Matrix Settings" dialog box will pop up, as shown below. You can add, modify, and delete matrices. Picture 117 a) Add: Set the Matrix Name, Matrix Type, Matrix Protocol, and Matrix Connection Method, and then click the Add button.
  • Page 76 C10M Series Splicing Controller User Manual Click the "Tools" - "Matrix Cascade" button, the "Processor - Matrix Cascade Settings" dialog box will pop up, as shown below. You can set up a cascade between the processor and the matrix. (Click the "Reset" button when setting up for the first time) Picture 118 Select a source in the source list, select the "Association Matrix"...
  • Page 77 C10M Series Splicing Controller User Manual Picture 120 a) Change the input name Select an input in the input source, click the setting name button after it, the “Change Name” dialog box will pop up, enter the name, and click OK to modify it successfully.
  • Page 78 C10M Series Splicing Controller User Manual Picture 121 b) switching input and output Select an input at the input source and set the output port. Click the Switch to button to switch the selected input to that output port. Picture 122 c) save the scene Click the "Save"...
  • Page 79 C10M Series Splicing Controller User Manual Picture 123 d) calling the scene Select a scene in the scene list and click the call button to apply the scene. Picture 124 3) Monitor input list Click the Monitor Input List button below the tree area and the tree area displays a list of...
  • Page 80 C10M Series Splicing Controller User Manual You can switch the input and output of the matrix by selecting the source of a matrix in the monitor input list and dragging it to a separate display, provided that the matrix of the independent display is in the same matrix as the matrix of the selected source.

  • Page 81: Direct Mode

    C10M Series Splicing Controller User Manual Picture 126 4.6.5 Direct mode Click the “Through Mode” button and the screen will change to the pass-through mode as shown below. Picture 127 1) Click the right button of the screen to select “AVI”, “DVI”, “HDMI”, “VGA”,...
  • Page 82 C10M Series Splicing Controller User Manual Picture 128 Picture 129 2) Click the right button and select “Adjust Channel Properties” to set the channel properties.
  • Page 83 C10M Series Splicing Controller User Manual Picture 130 Picture 131 4.6.5.1 Open/close screen When the "Screen Status" is "ON", you can click the "Close Screen" button to turn off all screens of the screen group. Otherwise, when the "Screen Status" is "OFF", you can click...
  • Page 84 C10M Series Splicing Controller User Manual Picture 132 Picture 133 4.6.5.2 Screen control parameters Click on “Screen Control Parameters”, the “Multi-Screen Properties” dialog box will pop up, which contains settings for 4 screen groups.

  • Page 85: Plan Import And Export

    C10M Series Splicing Controller User Manual Picture 134 4.6.6 Plan import and export In the "Function Module Configuration" dialog box, select the "Preview import and export" option, and then click OK to open the project import and export function module.
  • Page 86 C10M Series Splicing Controller User Manual Picture 136 2) Click the "File Import" button, select the import file path, click OK to import the plan file to the device.

  • Page 87: Matrix Plan Synchronous Call

    C10M Series Splicing Controller User Manual Picture 137 Picture 138 4.6.7 Matrix plan synchronous call In the "Function Module Configuration" dialog box, select the "Matrix Preset Synchronization Call" option, and then click OK to open the matrix plan synchronization call module. This function is used in the case of matrix cascading, the call processor plan...

  • Page 88: Version

    C10M Series Splicing Controller User Manual Picture 139 4.6.8 version Picture 140...

This manual is also suitable for:

Ds-c10m-s34Ds-c10m-s50Ds-c10m-hi4 ds-c10m-do4Ds-c10m-dpi2Ds-c10m-hi2t-4kDs-c10m-ho2t-4k

Table of Contents