Configure Network Parameters - HIKVISION DS-C12A User Manual

Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
5. Check Synchronize Time to synchronize the device time with the PC running the client after
adding the device to the client.
6. Finish adding the device.
- Click Add to add the device and back to the device list page.
- Click Add and New to save the settings and continue to add other device.

2.3 Configure Network Parameters

After your device is added to the client, you can configure network parameters of your device as
needed, including the IP address, subnet mask, and gateway.
Steps
1. On the Device Management interface, select the desired device in the list and click Remote
Configuration on the Operation column.
2. Click Network → General .
3. Configure the network parameter, including the IP address, subnet mask, and gateway.
4. Click Save.
Video Wall Controller User Manual
9