Miele 11 674 750 Operating Instructions Manual page 92

Problem solving guide
Problem
F73 or
Check the brew unit
92
Cause and remedy
The brew unit cannot be positioned correctly.
 Switch the machine off with the On/Off  sensor.
 Remove the brew unit and clean it by hand.
 Push the coffee ejector of the brew unit into the
correct position.
 Do not fit the brew unit. Close the service panel
and switch the coffee machine on with the On/
Off  sensor.
This will initialise the brew unit motor and put it back
into the start position.
 When
Insert the brew unit
the brew unit back in the machine. Close the
appliance door.
If the message appears again, reduce the amount of
coffee and/or select a finer grinder setting. Some
types of coffee have a much higher grinding volume.
appears in the display, put