Table of Contents
Advertisement
Cleaning and care
Clean the drip tray and waste
container
Danger of burning and scalding
on hot components or by hot liquids.
Components can become very hot
during operation. Touching hot
components can cause burning. The
liquids and steam dispensed are very
hot and can cause scalding.
If the pipework has just been rinsed,
wait a while before removing the drip
tray.
Please be aware that water in the
drip tray can also be very hot.
Do not touch hot components.
Clean the drip tray and waste
container every day to avoid
unpleasant smells and mildew.
The waste container is located in the
drip tray. Water from rinsing also
collects in the waste container.
A prompt will appear in the display
when the drip tray and/or the waste
container is full and needs to be
emptied. Empty the drip tray and the
waste container.
Remove the drip tray and the waste
container while the coffee machine is
switched on. Otherwise the message
Empty the drip tray and the waste
container
will appear in the display
even though the drip tray and/or the
waste container are not filled to the
maximum level.
Pull the drip tray carefully out of the
machine.
70
Empty the drip tray and the waste
container.
Remove the drip tray cover , the
drip tray and the lower panel .
Clean the lower panel by hand only
using hot water, a little washing up
liquid and a soft cloth.
All other parts are dishwasher-safe.
Clean all parts thoroughly.
Clean the contacts (metal discs) and
the space between them carefully.
Dry everything thoroughly.
The contacts will not be able to detect
that the drip tray is full if they are
damp or dirty.
Check the contacts and the area
around them once a week.
Advertisement
Table of Contents
