Miele 11 674 750 Operating Instructions Manual page 96

Problem solving guide
Problem
Fill and refit the water con-
appears after
tainer
switching on even
though the container is
filled and fitted in the
machine. The appliance
does not rinse.
The bean containers are
empty and the message
Fill the bean container
not appear.
Insert the drip tray and the
waste container appears
in the display, even
though both have been
inserted.
Although the drip tray
has been emptied,
Empty the drip tray and the
waste container appears
in the display.
96
Cause and remedy
The descaling cartridge is not fitted. The coffee
machine needs descaling.
 Switch the machine off with the On/Off  sensor.
Wait approx. one hour.
 Switch the appliance back on again. As soon as
Heating-up phase
select
Descale the machine
 Descale the coffee machine.
The fill level sensors in the bean containers are dirty.
 Remove the coffee beans from the bean
does
containers, e.g. with a vacuum cleaner.
 Clean the fill level sensors (see illustration) with a
soft, dry cloth.
The drip tray is not in the correct position and is
therefore not detected.
 Empty the drip tray and the waste container if
necessary.
 Reassemble all parts and push the drip tray back
in the coffee machine until it clicks.
appears, touch Mainten.
.
and then