Software Configuration; Device Connection - Ebyte NA611 User Manual

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

2.3 Software configuration

Steps：

(1) Open the serial port, find the corresponding device port number, the baud rate defaults to 115200-8N1,

click "open serial port".

(2) Send the "+++" command, and the serial port returns to "enter AT mode", indicating that the AT command

has been entered.

(3) Send

the

"AT+SSID=0,E103-W06-V1.1,2,12345678" to get the WIFI name and address required by the computer to

connect to the device later.

(4) Send the "AT+MODE?" command, the serial port returns "AT+MODE=1,1,1", if the serial port return

parameters are inconsistent with this, you need to send the "AT+MODE=1,1,1" command to modify the device

Working mode.

(5) Send the "AT+SVRPORTP?" command to query the IP address and port number of the next computer to

Figure 2-3-1 XCOM query connection parameters

"AT+SSID?"

command,

【RS485⇌ WiFi】NA611 User Manual

and

the

serial

port

will

return

Table of Contents

Na611a