Chengdu Ebyte Electronic Technology Co., Ltd.
ME31- XAAX0440 _User Manual
Chapter 5 Configuration software
5.1Acquisition and Control
Step 1 Connect computer to the device
(1)User can configure the device by selecting the interface (serial port/network port); if you choose the network
port, you must first select the network card and then search for the device.
(2) If you choose a serial port, you need to select the corresponding serial port number, and the same baud rate, data
bit, stop bit, parity bit and address segment search range as the device, and then search.
Step 2: Select the corresponding device
Copyright © 2012–2023 , Chengdu Ebyte Electronic Technology Co., Ltd.
29