Quick Start; Configuration Software Guide - Ebyte E90-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.

2. Quick Start

User needs to prepare below parts:

2.1 Configuration Software Guide

First install the antenna to the DTU, and then use USB to RS-232 or USB to RS-485 to connect the computer to the
DTU, M1 pulled up, M0 in any position to enter the configuration mode.
The software is used to query and set the module parameters, and the radio station needs to work in configuration mode.
The software interface is shown in the figure below:
Software Description
No
1
2
3
4
Copyright ©2012–2020，Chengdu Ebyte Electronic Technology Co.,Ltd.
Picture 2-1 PC software interface
Description
Serial port parameter area
Command execution area
Parameter area
Special command area
E90-DTU(2G4HD12) User Manual
5