Set Up The P2P Communication Of Wifi Direct - Ebyte NA611 User Manual

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

5.1.6 Set up the P2P communication of WiFi Direct

WiFi-Direct is a point-to-point connection, and the configuration process when in use is as follows.

(1) First configure to P2P mode, and both devices send AT commands at the same time: AT+MODE=3,1,1

(2) Then select one of the devices to configure as GroupOwner, and send instructions to set connection parameters

(see configuration and read WiFi-Direct (P2P) connection parameters for instructions):

AT+P2PDEVINFO=20,1,E103-W06WiFiDirectGo,E103-W06WiFiDirectClient

(3) Query the local port and IP address of the socket (or): AT+P2PSOCKET?

(4) Finally, configure another device as Client, and send instructions to set connection parameters:

AT+P2PDEVINFO=30,0,E103-W06WiFiDirectClient,E103-W06WiFiDirectGo

(5) Configure the remote port and address, set the IP address and port of the GroupOwner queried in the previous

【RS485⇌ WiFi】NA611 User Manual

Table of Contents

Na611a