Larry vs Harry Bullitt Assembly Manual page 10

Tools
6 15
mm mm
Components
L R
Pedals
To mount the Pedals, thoroughly grease the threads
and start by turning each pedal in with your fingers,
making sure they are on their corresponding side
and started correctly so you don't cross the threads!
Step 8 Mount Pedals
R
Afterwards torque to (40 Nm) with pedal wrench or
6mm hex.
(FIG. A & B)
8.0
L
FIG. A
Non-driveside tightens
L
counter-clockwise
FIG. B
R
Driveside tightens clockwise
Remember to put grease on the pedal
threads. The pedals is marked with L or R
so you know which side they fit.
Do not force the pedals into
the crank arms!