Larry vs Harry eBullitt E6100 Manual

eBullitt E6100 Tech Specs
Frame T6 heat-treated, 7005 aluminium, designed for Shimano STePS motor
Fork Chromoly steel with tapered steerer tube
Kickstand Aluminium with replaceable feet
Headset 1 ¼" FSA Orbit XII , 1 ½" tapered 1 ¼"
Steerer arm Chromoly steel with machined fittings and rubber covered balljoint
Dropouts Aluminium, machined and replaceable
Shimano STePS System
Motor E6100 mid crank based for low centre of gravity and light; 2.88kg
Battery High capacity 416Wh or 504Wh battery with low 4hr charge time
Crankset Crankset integrates perfectly with motor - 44 tooth chaining
Computer Multifunctional information on motor modes and battery use
Shifter Electronic and automatic gear selection with integrated light switch
Front wheel Novatec hub, sealed bearings, 10mm axle, laced to Alexrims Supra 36h
Rear wheel Nexus 5-speed Di2, Alfine 11-speed Di2 or XT 11-speed Di2, all laced to Alexrim Supra 36H
Tyres Schwalbe Marathon eBike optimized 20"x 1.75 and 26"x1.75
Tubes Schwalbe 20" and 26"
Fenders Plastic, black
Brakes TRP Quadium E-mtb with 180mm rotors
Handlebar 31.8 Riser bar, 680mm wide, 20mm rise
Stem 50mm 5 degree 31.6mm, black
Stemlifter Easy-Up 100mm of adjustment, black
Grips Velo Ergo lock-on
Bell Brass Japanese Wind Bell, black
Seat Original Bullitt Racing Seat, black
Seatpost 31.6 mm alloy 350 mm, black
Seat clamp Quick release
Front and rear lights Lumotech front / Secuzed Rear powered from main Shimano battery
Chain Chain or Gates Carbondrive CDX belt
Larry vs Harry Copenhagen Shop: Frederiksborggade 43, 1360 Copenhagen K, DK
info@larryvsharry.com
Larry vs Harry Manual E6100 October 2021 V2
by
Larry vs Harry
Phone: +45 31361719
www.larryvsharry.com
E6100