Find the Canopy Assembly Manual in the Canopy Box or at (“Muc-o ” has a Bio Grease larryvsharry.com/owners that cares about the environment) Note: It is possible to attach Twin Seat without the Canopy, but you need the Honeycomb Board!
Components What’s in the box? Head Rest Seat Head Rest Harnesses Page Page 5 Base Seat Page 7 Base Page 5 Two 5-point Harnesses...
Page 4
Step 1 Two tips before you start installing the Twin Seat, if you have the Foldable Seat mounted! Nuts Both sides Bolts Foldable Seat: Loosen 2 nuts and Armrest in Canopy: Loosen 2 2 bolts on the back of the Bullitt...
Page 5
5-6 Nm Point forward towards the headtube of the Bullitt Mount the 2 bolts (from the back Tighten the nuts, so the Twin Seat /outside of the Canopy) to the tubes sits closely to the frame. tubes (1). Add washers to the 2 bolts.
Page 6
Step 3 Attaching the Head Rest This way up! Align 4 holes on the back of the Align Head Rest with the 4 Canopy/armrests with the holes holes (make sure it turns the in the Bullitt frame. right way up). Slide the 4 bolts through the holes.
Page 7
Step 4 Attaching the Seat Slide! x2 This way up! Loosen 2 bolts in the red Slide the red adjustable mounts adjustable mounts with a 5mm backwards. Allen Key. Slide back Buckles Slide back Wrong Right! Before placing the Seat, turn the Put center-tube of the Seat in Seat around and make sure the the notch close to the red...
Extra Features Nice features to note with the Twin Seat The 5-point-Harnesses can easily The single kid 5-point-Harness is be converted for use with one placed in the middle of the seat. child for a more balanced ride. Adjust the height of the harnesses by easily pulling the straps up or down by the top.