Advertisement
Tools
25
10
15
Crank/
BB tool
T
mm
mm
Components
Rear Wheel
Front Wheel
Grease axels and centerlock rotor splines.
Check rotor centerlock (40 Nm) and rotor bolts T25
5.0
(4 Nm), cassette lockring (40 Nm) and spoke tension.
For wheels with nuts, tighten (30-45 Nm).
Wheels with QR, make sure lever is fully secure.
Inflate tires and adjust Mudguards.
Step 5 Mount Wheels
2x
15
mm
10
mm
(Only needed
for pedal brake)
Remember if installing Gates Belt: Wait with installation
of Rear Mudguard Stays untill Gates Belt is installed.
5.0
Advertisement
