Advertisement
Tools
5
mm
Components
Chain or Gates Belt
x2
Gates frame block
Chain
Install Chain, check length and quick link.
To adjust tension, use adjuster screws on Dropouts.
Check Gates frame block 2x 5mm hex bolts. (14 -
17Nm) (FIG. A)
Step 9 Install Gates Belt or Chain
Check or install Gates Frame block
1
Gates Belt
1
Remove frame block to slip belt into rear triangle.
Install belt, tension and alignment to Gates Carbon Drive
Specification.
See the full manual from Gates here
Mount frame block 2x 5mm hex bolts. (14 - 17Nm) (FIG. A)
To adjust tension, use adjuster screws on Dropouts.
9.0
Make sure to
check/tighten bolts even/also
when using chain.
FIG. A
Advertisement
