Larry vs Harry Bullitt Assembly Manual page 14

Tools
8
mm Phillips
Torque kickstand bolts 2x 8mm to (23-27 Nm)
12.0
to each side of the frame.
Finish by tightening 2x bumpers (Phillips)
Step 12 Check Kickstand or Install (only
12.0
Installing kickstand on RÅ:
Set kickstand in place, start 8mm bolt by hand.
Tighten 2x (8mm) to each side of the frame (23-27 Nm).
Finish by tightening 2x bumpers (Phillips)
)
RÅ
FIG. A
(FIG. A)