Your Remote Display - Toshiba RAC-PD0812CRRC Operating Instructions Manual

Timer Functions (cont.)
Tim er on
Continue
to press
PRESET
TIMER ON
or
MARCHE/
ON
TIMER OFF
ARRÊTER/
until desired
OFF
time is
reached.
1 2
TIMER ON TIMER ON
5 6
TIMER OFF TIMER OFF
Example: Setting the unit to turn on after 6 hours, operate for 2 hours, then turn off (see the fi gure below).

Your remote display

Timer On
Timer Off
Page 26
3. Wait 2 seconds, then the TIMER OFF function will be activated.
The digital display on your remote control will then return to
the temperature display.
NOTICE
When setting the TIMER ON or TIMER OFF functions, up to 10
hours, the time will increase in 30 minute increments with each
press. After 10 hours and up to 24, it will increase in 1 hour
increments. The timer will revert to zero after 24 hours.
You can turn off either function by setting the timer to "0.0h".
3
X12
7
X16
Timer
Timer is set
Starts
To turn ON
6 hours from
current time
Timer is set
To turn OFF
Current
8 hours from
Time 1PM
current time
4
Setting both TIMER ON and
TIMER OFF at the same time
sec
Keep in mind that the time periods
you set for both functions refer to
hours after the current time. For
example, say that the current time
is 1:00 PM, and you want the unit to
turn on automatically at 7:00 PM and
want it to operate for 2 hours, then
8
automatically turn off at 9:00 PM.
sec
Do the following (side fi gure):
2PM 3PM 4PM 5PM
6 hours later
8 hours later
Unit turns Unit turns
ON
OFF
6PM 7PM 8PM 9PM
User Manual