Sliding Window Installation - Toshiba RAC-PD0812CRRC Operating Instructions Manual

Foam seal B
(Adhesive
type-shorter)
Foam seal A
(Adhesive
type)
Window slider B
(if required)
Window slider A
Foam seal C
(Non-adhesive type)
Security
Bracket
2 Screws
NOTICE
To ensure proper functioning, DO NOT overextend or bend the hose. Make sure that there is
no obstacle around the air outlet of the exhaust hose (in the range of 500mm) in order for the
exhaust system to work properly. All illustrations in this manual are for explanation purposes
only. Your air conditioner may be sl
User Manual
Type 2: Sliding window installation
1. Cut the adhesive foam seal A and B strips to the proper lengths,
and attach them to the window sash and frame as shown.
2. Insert the window slider assembly into the window opening.
3. Cut the non-adhesive foam seal C strip to match the window
height. Insert the foam seal between the glass and the window
frame to prevent air and insects from getting into the room.
4. If desired, install the security bracket with 2 screws as shown.
5. Insert the window slider adaptor into the hole of the window
slider.
al shape shall prevail.
Page 17