CONTENTS Safety Precautions SAFETY PRECAUTIONS Warning................................Warning Caution................................To prevent injury to the user or other people and property damage, the following instructions must be Operation tips..............................followed. Incorrect operation due to ignoring instruction will cause harm or damage. Unit identification............................... ◆...
Page 3
Or else it may cause fire, electronic shock, machine damage, etc. Contact the dealer or Toshiba air conditioning service hotline to do the re-locate or repair work Water may enter the unit and degrade the insulation. It may Do not clean the air conditioner with water.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. dealer or Toshiba air conditioning service hotline. Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord.
Safety Precautions Operation instructions Operation tips Control panel operation Before you begin, thoroughly familiarize yourself with the control panel and remote controller as shown below and all its functions, then follow the instructions for the functions you desire. The unit can be controlled by the operating this appliance.
Operation instructions Operation instructions CONTROL PANEL COVER To adjust vertical air flow direction, adjust any one of the horizontal louver blades. When turning up or down the horizontal louver blades, always keep the blades 1. Grasp the top of the control panel cover and pull it SLEEP MODE (RAC-H**CR series only): DRY operation (RAC-H**CR series only): horizontality.
Care and cleaning Installation instructions Suggested tools Air Filter Cleaning 1. Screw driver The air filter should be checked at least every two weeks to see 2. Tape measure or ruler if cleaning is necessary. Trapped particles in the filter can build 3.
Installation instructions Installation instructions Installation of the unit into the Housing Condensed water treatment 1. Fit the drain pan to the housing and attach a drain tube to a wall frame or architrave suitable location if required. 2. Take out the drain tray and screws (which provided with your 2.
Installation instructions Troubleshooting tips Step 3. Installation occurrences that are not the result of defective workman-ship or materials in this appliance. Normal Operation rainy days or when the humidity is high. This design feature helps remove moisture and improve efficiency. Fig.6).
Need help?
Do you have a question about the RAC-H07CR and is the answer not in the manual?
Questions and answers