Table of Contents
Advertisement
Available languages
Available languages
Operating Instructions
NOTICE
When one of the above malfunctions
the unit and check for
any obstructions. Restart the Unit. If the
and unplug the power cord. Contact the
manufacturer or its service agents or a
ed person for service.
COOL operation
•
Press the "MODE" button until the "COOL"
indicator light comes on.
•
Press the ADJUST buttons Up (
Down (
) to select your desired room
temperature. The temperature can be set
within a range of 17°C~30°C/62°F~86°F.
•
Press the "FAN SPEED" button to choose the fan
speed.
HEAT operation
(available on HEAT models only)
•
Press the "MODE" button until the "
indicator light comes on.
•
Press the ADJUST buttons Up (
Down (
) to select your desired room
temperature. The temperature can be set
within a range of 17°C~30°C/62°F~86°F.
•
Press the "FAN SPEED" button to choose the fan
speed. For some models, the fan speed cannot
be adjusted while in HEAT mode.
DRY operation
•
Press the "MODE" button until the "DRY"
indicator light comes on.
•
While in this mode, you cannot select a fan
speed or adjust the temperature. The fan
motor operates at LOW speed.
•
Keep windows and doors closed for the best
ect.
•
Do not connect the duct to a window.
AUTO operation
•
When you set the air conditioner to AUTO mode,
it will automatically select cooling, heating
(cooling only models excluded), or fan only
operation depending on what temperature you
have selected and the current room temperature.
•
The air conditioner will control room
temperature automatically according to the
temperature point set by you.
•
Under AUTO mode, you cannot select the fan
speed.
Page 10
FAN operation
•
•
the unit
•
TIMER operation
•
) or
•
"
) or
•
•
•
SLEEP operation
Pressing this button will increase (during cooling
operation) or decrease (during heating operation,
applicable models) 1°C/1°F after 30 minutes.
The temperature will again increase (cooling) or
decrease (heating) by another 1°C/1°F after an
additional 30 minutes. This new temperature will
be maintained for 7 hours before returning to the
originally selected temperature. This ends the
Sleep mode and the unit will continue to operate
as originally programmed.
Press the "MODE" button until the "FAN"
indicator light comes on.
Press the "FAN SPEED" button to choose the fan
speed. The temperature cannot be adjusted.
Do not connect the duct to a window.
When the unit is on, pressing the Timer button
OFF indicator light illuminates. Press the Up (
or Down (
) button to select the desired time.
Press the TIMER button again within 5 seconds.
The Auto-on start program is initiated and the
TIMER ON indicator light illuminates. Press the
Up (
) or Down (
) button to select the
desired Auto-on start time.
, press the Timer button to
initiate the Auto-on start program. Pressing it
ve seconds will initiate the Auto-
stop program.
Press or hold the Up (
button to change the Auto time by 0.5 hour
increments, up to 10 hours, then at 1 hour
increments up to 24 hours. The control will
count down the time remaining until start.
The system will automatically revert back to
display the previous temperature setting if there
is no operation within 5 seconds.
Turning the unit ON or OFF at any time or
adjusting the timer setting to 0.0 will cancel the
Auto Start/Stop timer program.
Should a malfunction occur, the Auto Start/Stop
timed program will also be cancelled.
NOTICE
This feature is unavailabe in FAN or DRY mode.
stop program. The TIMER
)
) or Down (
)
User Manual
Hide quick links:
Advertisement
Table of Contents
