Installation
4 Installation
NOTICE
The following sections detail the steps for unpacking and installing the size 10
COMBISTOP type 38 Theater Load Brake (shown below). Read this chapter thoroughly
before beginning the installation process.
Figure 1 Theater Load Brake with optional Hand Release Lever and Microswitch
4.1 Required Tools
You will need the following tools before you begin the Theater Load Brake installation.
Customer supplied hex key for Brake basket mounting bolts
•
17mm wrench and/or socket for Magnet assembly nuts
•
•
19mm wrench and/or socket for standard release bolts
•
15mm wrench and/or socket for hand release bolts
13mm wrench for enclosure stud mounting nuts and lifting tab bolts
•
10mm wrench and or socket for micro-switch mounting bolt.
•
8mm open end wrench for micro-switch adjustment
•
•
Feeler gage set
•
Digital multimeter for micro-switch setup
2020 KEB America, Inc.
©
Stay Safe! Stay Informed!
Read and follow all safety instructions prior to installing the
Theater Load Brake.
21