Boiling eggs to different hardnesses
You can boil eggs to two different degrees of firmness in the appliance . It will always
reach the softest level first . For reliable results, all the eggs used must be of the same
size and have the same starting temperature .
For the first cooking process, the symbols
For the second cooking process, the symbols
♦
Prepare the appliance as described in the section Preparations .
♦
Turn the control switch
level of the eggs (the symbols to the right of the control apply):
♦
Press the operating switch
lamp lights up and cooking begins .
♦
As soon as the eggs have reached the first, softer hardness level, a beep will be
heard . Then press the operating switch
integrated control lamp goes out .
♦
Take off the lid
the softer degree of hardness) .
♦
Replace the lid
left of the control (the desired hardness level for the eggs that remain in the appliance):
Symbol
SEKT 400 A1
to the position that corresponds to the softest hardness
to turn the appliance on . The integrated control
and carefully remove the desired number of eggs (now boiled to
and turn the control switch
Meaning
medium-boiled eggs in 2nd cooking process,
after soft-boiled eggs in 1st cooking process
hard-boiled eggs in 2nd cooking process, after
medium-boiled eggs in 1st cooking process
hard-boiled eggs in 2nd cooking process, after
soft-boiled eggs in 1st cooking process
to the right of the control apply .
to the left of the control apply .
again to switch the appliance off . The
to the position of the symbol to the
GB │ IE │ NI │ CY
│
9
■