Commissioning; 5.1 Teaching The Device; Teaching To Altech V3 Ip Base Station - Altech ALEC-42090D Manual

5

Commissioning

5.1 Teaching the device
In order be integrated into the Altech V3 IP System and to communicate with other
devices, the room control unit Display must be taught-in first. The room control unit
Display is taught-in directly to the Altech V3 IP base station, or in conjunction with
the radiator thermostats, to the Altech V3 IP Access Point. In case of direct teach-
ing-in, the configuration is done on the device itself; in case of teaching-in via the
Access Point, it is done via the IP app.
5.2

Teaching to Altech V3 IP Base Station

For teach-in, keep a minimum distance of 50 cm between the devices.
The teach-in process can be interrupted by shortly pressing the teach-in
key again. This is confirmed by a short flash in red colour of the device
LED.
If no teaching-in is performed, the teach-in mode is finished automatical-
ly after 30 seconds.
DK
NO
SE
FI
FR
GB GB
105