Function - Altech ALEC-42090D Manual

• Do not expose the device to humidity, vibration, continuous sunlight or other
types of heat radiation, coldness, or mechanical loads.Ensure that children do
not play with this device or the packaging. Children must be monitored if nec-
essary.
3

Function

The Altech V3 IP room control unit Display ALEC-42090D allows to set the room
DK
temperature in a time-controlled way in order to adapt the heating phases to your
NO individual requirements. The room control unit measures the temperature and
transmits these data cyclically to the Altech V3 IP Base station ALEC-42010-xx or to
SE
connected Altech V3 IP radiator thermostats. The registered values allow an exact
regulation of the room temperature. The target temperature can be set manually
FI
with the setting wheel.
FR
The range within buildings can differ strongly from the range outside (in
GB GB
open air).
Communication with other components will be performed over the Homematic
(HmIP) radio protocol. The radio transmission is done on a non-exclusive transmis-
sion path; thus, disturbance cannot be completely excluded. Disturbance impacts
can be caused by switching processes, electric motors or electric appliances.
102