Table of Contents
Advertisement
2. In the drive of your choosing, place the zipped compo-
nent file into a directory that looks like this, for example:
D:\TM_Export\RobotName\ComponentObject\Pillar_
Ewellix_LIFTKIT_v01_Command.zip
3. Open the Import/Export menu in TMflow, then plug the
USB drive into the robot controller or select the network
drive as shown here:
4. Select "Import", then select the correct Robot ID. In this
example, the robot ID is simply, "RobotName" based on
the directory above.
5. Select "Component", then click on the Ewellix pillar com-
ponent, then click "Import".
12
12
L I F T K I T- O M
Advertisement
Table of Contents
