Quality Control; Maintenance - Macherey-Nagel NANOCOLOR Advance Quick Start Manual

Water analysis

Hide thumbs Also See for NANOCOLOR Advance:

Table of Contents

1. Wipe the outside of the device with a damp cloth. Use water or a mild detergent. Then

dry the unit with a soft cloth.

2. If necessary, clean or dry the touch screen with a soft, lint-free cotton cloth.

3. If necessary, clean or dry the cuvette slot and adapters with a soft, lint-free cotton cloth.

For details on cleaning and maintenance of the device, refer to the complete operating

instruction of the device.

Quality control

Each laboratory or facility must establish its own QC policy.

To check the performance of the test kits and the device used, we recommend measuring

standard solutions of known concentration within the measuring range.

The photometric accuracy of the NANOCOLOR

the NANOCONTROL NANOCHECK 2.0 color solutions (REF 925703) offered by

MACHEREY-NAGEL.The halogen lamp can be checked by the internal lamp check (see

detailed operating instructions of the device). The wavelength accuracy can be checked

with the integrated holmium oxide filter (see detailed operating instructions of the device).

Malfunction or damage of the device due to incorrect maintenance. Maintenance of the

device may only be carried out by qualified personnel.

Incorrect measurements: A dirty cuvette slot can lead to contamination of the inserted

cuvettes and false results. Check the cleanliness of the cuvette slot and the adapters at

regular intervals and during maintenance. Clean the cuvette slot and the adapters if they

are dirty (see chapter "Cleaning").

For further maintenance information, follow the instructions in the complete operating

instructions of the device or contact MACHEREY-NAGEL.

Spectrophotometer NANOCOLOR

Advance can be checked with

NOTICE

WARNING

Advance 1.0, 08.2020

Table of Contents